Hot nozzle Diversion board Hot runner system Hot half mold system Thermostat Timing controller Liquid silicone cold runner

Liquid silicone (LSR) cold runner
  • Liquid silicone (LSR) cold runner
  • Liquid silicone (LSR) cold runner
Liquid silicone (LSR) cold runner

Silicone rubber (LSR) features:
1.Non-toxic to human body, odorless and tasteless, good transparency, and can be disinfected;
2.Heat resistance: It has good heat resistance, and the continuous working temperature reaches 150 degrees for a long time;
3.Cold resistance: It has good low temperature performance and can maintain good elasticity at -50 degrees;
4.Electrical properties: Good electrical insulation. Silicone rubber mold has high resistivity. It maintains stable resistance over a wide temperature and frequency range. It has a very low resistance to high voltage corona discharge and arc discharge. Engage in sex.
5.Air permeability: Silicone rubber film has better air permeability than ordinary rubber film;
6.Flame retardancy: Silicone rubber is flammable, but with a small amount of flame retardant, it has flame retardancy and self-interest.

Hotline:13962425877

Product details:
Cold runner features:
1.The flow channel adopts an open form to ensure the flow channel is smooth without dead corners, which is convenient for cleaning and maintenance;
2.The cold runner generally adopts a cold half mold system with a pneumatic valve needle cold nozzle, which provides advantages for the manufacture of silicone injection molding molds, saving time and improving efficiency;
3.Fewer casting systems, shorter molding cycles, less material loss and more material savings;
4.The water path of each cold nozzle can be controlled separately, in order to ensure that the temperature of each cold nozzle is consistent;
5.The valve needle and valve sleeve are made of imported steel and special processing technology, which is more wear-resistant and corrosion-resistant, reducing the risk of stuck needles and material leakage.



x02.jpg
Related products:

Contact Us

  • 13962425877
    Tel: 0756-3635576
    Fax: 0756-3635579
    Contact: Mr. Yang
    Mobile: 13962425877/13826979668 (same WeChat number)
    E-mail: hw@zhhanweitech.com
    Address:No. 22 Jinheng 2nd Road, Jinding Technology Industrial Park, High tech Zone, Zhuhai City, Guangdong Province
    Building 42, No. 168 Qiantangjiang Road, Huimin Street, Jiashan County, Jiaxing City, Zhejiang Province
    North Ning Guiwu Industrial Zone, Vietnam/Pinghe She Pingshi Yi 2 District, Yongzheng County, Dong Nai Province


Follow Us

CopyRight © 2025 Zhuhai Hanwo Hot Runner Technology Co., Ltd. All rights reserved   粤ICP备2025362382号